Confirming knowledge of building services
Contents |
[edit] Introduction
Validation of building services should be held in higher regard than it often is by many people in the construction industry. Whether managing a building and its services or designing and installing systems into an existing building, knowledge is power. Knowing how services perform in a building is as important as knowing which services are present. This knowledge gives engineers and facilities managers the power to make the correct decisions and apply the right strategies.
[edit] Building services life expectancy
Building services, such as water, ventilation and electrical systems, can all degrade over time through mechanical or chemical processes. CIBSE guide M is widely used to give estimates of component and system life expectancy; however, actual life expectancy can vary greatly from these estimates depending on how the system was commissioned, used and maintained.
In many retrofit cases, to achieve the best possible result it would be preferable to remove an existing system and start again — from an engineer's perspective, this would give the freedom to perfect designs. However, in most cases, this isn’t possible, due, among other things, to budgetary restraints.
It is often necessary to use parts of an existing system and repurpose parts to provide an extension to (or even potentially) a whole new service. This pushes ingenuity and is a tremendous accolade to the modern engineer. However, without accurate validation information, even the most adaptable engineer can end up with a system that falls short of client expectations, or worse still fails completely, costing all parties involved.
[edit] Building services validation
Many engineers presume validation data stops at things like power consumption and flow rates; however, the condition of the components in the system is also important and requires specialist knowledge to ensure it is accurately captured. This additional information can be obtained in many ways, dependant on the system in question and its use, but modern technology helps make this process quicker, safer and easier. For example, the residual wall thickness of mild steel pipework can be non-destructively captured via ultrasonic testing, and potential faults in electrical distribution boards can be spotted via a thermographic survey.
Whether looking to plan a maintenance program, retrofit a system or validate the condition of a building services system for any other purpose, using the right technology and the right expertise are both integral to this process. Performing these tasks regularly on a system ensures peace of mind for everyone involved.
BSRIA has the expertise and technologies at its disposal to advise and perform validations that ensure the data captured is what you need to stay informed. If you require any more information about validation or how BSRIA can help, please contact consultancy@bsria.co.uk/
This article originally appeared on the BSRIA website under the headline, 'Building Services Validation: Is my building the one I thought it was?' It was published in February 2021.
--BSRIA
[edit] Related articles on Designing Buildings Wiki
Featured articles and news
The continued ISG fall out, where to go?
Support for ISG contractors, companies and employees.
New HES national centre for traditional building retrofit
Announced as HES publishes survey results which reveal strong support for retrofit.
Retrofit of Buildings, a CIOB Technical Publication
Expected to become one of the largest activities in the global construction industry.
The ECA industry focus video channel
Keeping update with the industry session by session.
Over 25 recorded informations sessions freely available.
AT Awards 2024 ceremony East London October 25th.
Revisiting the AT community at the 2023 awards evening.
The Community Housing Fund and built affordable homes
CLTN reviews the impact of the Fund and calls for extension.
The grading system of the Regulator for Social Housing
A background, an explanation and ten recent enforcements.
Construction, repair and maintenance. Book review.
Putting new life into a city with a 1900 year history.
BSRIA Briefing 2024: Sustainable Futures speakers
Redefining Retrofit for Net Zero Living 22 Nov.
Wall of support for post-Grenfell regulation of electricians
Call for a shake-up of the construction industry highlighted on radio.
Digital sustainability through future AEC tools
Bringing together industry and academia to meet challenges.
Skills gap for net zero highlighted to Minister for Industry
ECA convenes roundtable discussion at Portcullis House.
Evidencing Net Zero with the new UK buildings standard
Pilot version with detailed excel proforma out now!
Scottish Building Safety Levy, in consultation
From direct remediation and the RPDT, to the costs and alternatives.
Waves of warmer homes grants for the rental sector
Boosting energy efficiency standards for all rented homes.
A refocus of the National Planning Policy Framework
Key terms described in brief, as the consultation closes the evening of the 24th.
Fortified farmhouses of the unruly 16th-and 17th-century borders.